Product Overview
Bijur Delimon Injector
Bijur Delimon ZEM345PDDDDE PDI ZEM34 5 Quick Outlets
Part Number / SKU: ZEM345PDDDDE | Manufacturer: Bijur Delimon | Availability: Made to Order - Lead Time: 20-30 business days
Overview
Bijur Delimon ZEM345PDDDDE (factory description: PDI ZEM34 5 QUICK OUTLETS). ZEM injectors are single-line positive displacement injectors (PDI) for oil or soft grease. Each outlet discharges a fixed, cap-set volume per cycle; a spring recharges it when line pressure is relieved.
Specifying, quoting, or replacing ZEM345PDDDDE
Add to cart at the price shown, or use the Request a Quote form: send the part number ZEM345PDDDDE, the quantity, and a photo of the nameplate or the old part, and we reply the same day. L. DeWitt McCarter is an authorized Bijur Delimon, Farval and LubeSite distributor in San Antonio, TX — (210) 494-1997.
Key Specifications
| Manufacturer part number | ZEM345PDDDDE |
| Brand | Bijur Delimon |
| Selling unit | Each (1 piece) |
| Series | ZEM 34 |
| Outlets | 5 |
| Outlet type | Push-to-connect for 4 mm tube |
| Discharge per outlet, left to right | #1 0.10 cc (cap 10); #2 0.10 cc (cap 10); #3 0.10 cc (cap 10); #4 0.10 cc (cap 10); #5 0.16 cc (cap 16) |
| Total per cycle (all outlets) | 0.56 cc |
| Replacement cap kit(s) (cap + o-ring + spring) | 0.10 cc: 23335; 0.16 cc: 23336 |
| Mounting | Integral 5-outlet manifold (no separate manifold needed) |
| Oil viscosity | 20 to 1500 cSt at operating temperature |
| Grease | Soft grease NLGI 000 and 00 (consult BDI) |
| Operating pressure | Min 15 bar (220 psi) at injector; max 45 bar (650 psi); recommended 21 bar (300 psi) |
| Relieving (reset) pressure | Line must drop to 0.3-0.7 bar (5-11 psi) between cycles |
| Seals | Viton |
| Outlet tube | 4 mm - M8x1 compression (C) or push-to-connect (P) |
| Output ranges | Series 32/33/34: 0.01-0.16 cc; 35: 0.06-0.6 cc; 39: 0.2-1.5 cc |
What You'll Also Need
- Pump that builds 220 psi at the injector and vents to 5-11 psi between cycles, e.g. SureFire II PDI (450 psi relief, quick dump valve) (DS 35135; DS 36410).
- Series 32 / 33 injectors need a manifold or tee: 32 -> tee 22564 or 34539/34540/34541/ZEM32M manifolds; 33 -> tee 73462-3443 or 31000-4 to -10 (DS 35135 p.4-5).
- Compression outlets: 4 mm sleeve 35001 and male bushing 15326; lube-point fitting 4 mm x 1/8 NPT B3297 (Catalog B151 p.84).
- 4 mm nylon (5N25) or copper (5C25) feed tube; 6 mm nylon main line (B10437C) (Catalog B151 p.84).
Before You Order
- Cap change: 11 mm spanner, fit new green o-ring, replace the spring, torque 60 in-lb (6.75 Nm) (TS013 p.1).
- Dose is fixed by the cap, not adjustable: read the cap stamping (01, 03, 06, 10, 16, 20, 30, 40, 60, 100, 150 = hundredths of a cc) to match an existing point (DS 35135 p.2).
- Doses are series-specific: 0.01, 0.03, 0.16 cc only on 32/33/34; 0.2-0.6 cc on 35/39; 1.0 and 1.5 cc only on 39 (DS 35135 p.2).
- Injectors recharge only when the line relieves to 0.3-0.7 bar (5-11 psi) between cycles; the pump or dump valve must vent the line (DS 35135 p.2).
- Letters in the part number list outlets left to right; X = plugged outlet (Series 34, 35, 39) (DS 35135 p.2).
Choosing Between Options
- Change a dose without replacing the injector: TS013 cap kits (cap + o-ring + spring) are specific to series and outlet type; the kit for this injector is listed in the specifications (TS013 p.2).
- Push-to-connect (P) outlets cut fitting labor; compression (C) outlets use M8x1 fittings on 4 mm tube (DS 35135 p.1-2).
- ZEM series can be mixed in one system (DS 35135 p.1).
Product Documentation
Opens in your browser — use your browser's save option to download a copy.
Browse all Bijur Delimon products or request a quote for ZEM345PDDDDE — we reply the same day.
