Product Overview
Will this fit?
Yes if your mill uses a Bijur L5P one-shot lubricator (the push-handle pump on the side of a Bridgeport Series I, Series II and most Taiwanese knee-mill clones) and the reservoir sits to the left of the handle when you face the pump: that is the L, left-hand, D3173C. If the reservoir sits to the right, order the L5P-R kit instead. The pump body, stroke and output are identical.
What the kit replaces: the pump (1–5 cc per stroke, factory-set to 5 cc, 75 psi max, 1-pint reservoir, 40-micron inlet filter), the 5/32" tubing between the pump and the ways with BDI's K1079 tubing service kit, ten meter units (four FSA-0, four FSA-1, two FT-1, the mix Bridgeport specified for the knee, saddle and table ways), 50 nylon compression sleeves and 20 nuts.
Check first: count your meter units and note the letters stamped on each. A standard Bridgeport has 8–10. If yours are stamped something other than FSA-0, FSA-1 or FT-1, tell us and we will swap the mix at no charge; the price is the same for any FSA/FJB/FT unit.
Lead time: the L5P pump and meter units ship from factory stock in 3–5 business days. The K1079 tubing kit is built to order (about 8 weeks at BDI as of this writing). We ship the pump and meter units first and the tubing kit when it releases. If you only need the pump and meter units now, buy the pump alone and a meter-unit pack.
You will also need: ISO 68 way oil (Vactra No. 2 or equivalent). The L5P is for oil 150–8,000 SSU, never grease.
More detail: how many meter units can an L5P run.
What's in the box: 1 x D3173C LUB L5P-L W/RES; 1 x K1079 KIT TBG SERVICE 5/32; 4 x B1083 MU FSA-0; 4 x B1084 MU FSA-1; 2 x B1113 MU FT-1; 1 x BB8272 SLEEVE COMP BAG 50 QTY; 20 x B1095 NUT COMP 5/32 TBG.
Genuine Bijur Delimon / LubeSite parts from an authorized distributor. Free shipping. Regular price is the sum of manufacturer list prices.
