M2500G Divider Valves
Bijur Delimon
M2500G Divider Valves
Replacing an existing part?Send us the part number or a photo of the nameplate and we will confirm the match, or the current successor part number, before you order.
Request a QuoteProgressive divider valves
M2500G Series
Sectional progressive divider manifolds in zinc-nickel plated steel. Output is adjustable per section, and every outlet must discharge before the cycle repeats — so a blockage anywhere stops the valve and is immediately detectable. Available in 3 to 10 sections, with inch or British parallel porting.
Reading the part number
- M2500 Series
- B / C B — 1/8-27 NPSF (inch) C — 1/8-28 BSPP
- 3–10 Number of sections
- G Series suffix
So M2500C7G is a seven-section manifold with 1/8-28 BSPP outlets.
Shared specifications
- Discharge per cycle0.005–0.080 cu. in. (0.08–1.31 cc)
- Max operating pressure400 bar (5,800 psi)
- MaterialSteel, zinc-nickel plated
- Outlet ports1/8-27 NPSF or 1/8-28 BSPP
Replacing an existing manifold?
Match the section count and the outlet thread before ordering — NPSF and BSPP are not interchangeable. Send the part number stamped on the valve body, or a photo of it, and we will confirm the replacement and any tie-bar or end-plate hardware you need.